x404.co.uk
http://www.x404.co.uk/forum/

never mind, im an idiot :D
http://www.x404.co.uk/forum/viewtopic.php?f=4&t=3256		 Page 1 of 1
Author:  soddit112 [ Thu Oct 08, 2009 4:17 pm ]
Post subject:  never mind, im an idiot :D
hi guys

bad news, my motherboard is no longer functioning, was overclocking (CPU was within previous stable limits, was experimenting with RAM), think i went a bit far because the POST screen was scrambled, reset the CMOS and it refused to reboot :cry: pulled out my old PC and exchanged power supplys, just to make sure, old PC boots fine with current supply, current PC doesnt move an inch with either. it lights up when plugged it, but pressing the power button or shorting the pins with a screwdriver does nothing

so i was wondering what my plan of action should be: is there any way i can bring it back from the dead, or am i in for a new mobo? brand is Abit, who are no longer in business so getting a new BIOS chip is unlikely, unless one of you lovely people happen to have one lying around? i cant for the life of me think what else may have gone pop, and resetting the CMOS does nothing. :?

thanks for any replies, this has really thrown me. first piece of hardware ive killed!!

will update as and when, posting this off crappy living room PC which is an Athlon XP beige box wonder... i dont like it
Author:  Brad [ Thu Oct 08, 2009 7:23 pm ]
Post subject:  Re: fried my mother board, need advice
Offt soddit, sounds like a case of overclcoking gone wrong :(

Erm personally i would suspect that if theres no post its died, I once fixed a mobo that didnt post by using heat treatment on you re solder part of the mobo together, but it didn't last 1 day haha :D

I would say its a certain death, i mean did it die when changing volts in the bios i mean the only thing i can think of is a major overvolt??

Just to be nosey :P was it anything good :O haha

Regards Brad
Author:  Danstevens [ Thu Oct 08, 2009 8:06 pm ]
Post subject:  Re: fried my mother board, need advice
If you want to get a BIOS chip, you could probably find one on eBay and it might be worth a try before you fork out for a new mobo. However, to me, this sounds like a new mobo job.
Author:  soddit112 [ Thu Oct 08, 2009 9:09 pm ]
Post subject:  Re: fried my mother board, need advice
theres no post, nothing, not even the fans are twitching, which is why im thinking corrupted BIOS rather than hardware failure. if something was broken/ malfunctioning it should atleast run the fans. its as if the power supply isnt even getting the "on" signal :?

the RAM was running at 2.1V (had it up to 2.3 just fine), everything else was well within same limits (CPU: 1.32v, NB: 1.25v, VTT: 1.23v), so i dont think voltage would have killed it :? i hadnt overvolted on that reboot anyhow, it was clock speed only.

the overclock was about 975MHz RAM, with a ~406MHz FSB and 3.65GHz core. with the RAM at 1:1 ratio its happy up to 3.7, but was wondering if it was faster with higher RAM/lower core

@dan thanks for the ebay advice, i will definitely give it a shot :)
Author:  soddit112 [ Fri Oct 09, 2009 7:22 am ]
Post subject:  Re: fried my mother board, need advice
SORRY, FALSE ALARM

left my CMOS jumper on the wrong way round (im sure the damn thing keeps switching...) flipped it back to the right pins and everything is fine :D

sorry for wasting your time guys, but thanks for the advice :)
Author:  Brad [ Fri Oct 09, 2009 6:34 pm ]
Post subject:  Re: never mind, im an idiot :D
hahahaa hehe :P

I was proper laughing at that :mrgreen: :lol:
Author:  soddit112 [ Fri Oct 09, 2009 8:14 pm ]
Post subject:  Re: never mind, im an idiot :D
so was i, couldnt believe it :|

the number of times ive had to use it, youd think id remember which way it goes by now...

dont you dare mis-quote me on that :P
Author:  Brad [ Sat Oct 10, 2009 9:40 am ]
Post subject:  Re: never mind, im an idiot :D
hehe what motherboard was it ?
Author:  saspro [ Sat Oct 10, 2009 10:49 am ]
Post subject:  Re: never mind, im an idiot :D
soddit112 wrote:
the number of times ive had to use it, youd think id remember which way it goes by now...


sig'd :D
Author:  soddit112 [ Sat Oct 10, 2009 12:47 pm ]
Post subject:  Re: never mind, im an idiot :D
Brad wrote:
hehe what motherboard was it ?


abit IP35, nabbed it for 60 quid after my IN9 didnt work with my e8400 :D

saspro wrote:
soddit112 wrote:
the number of times ive had to use it, youd think id remember which way it goes by now...


sig'd :D


:shock:
Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/