Then, for your personal amusement, I got a power drill and improved the airflow through the front of my case





(yes I did take the front off the case first)

Thought I'd try and revive this thread And let you all reminisce - yes, this is my current system, thankfully only for another week!



Specs:-

Northwood 2.4 P4 @3.2GHz
ASUS P4C 800E Deluxe
1GB Corsair Value RAM (my GeIL Black Dragon stuff died )
512mb HD3850 8x AGP
2x 40GB RAID0 for OS
320mb Sammy 7,200rpm HDD for storage.

Circa 2004 then?

Mhmm! Round about then

Gaming Rig:

Changed a bit from that picture buy CBA to take a new one.
Current Specification:
Antec 1200 with a modified window
Asus Striker II Extreme
Intel Core 2 Quad Q9450
8GB Gskill DDR3 1600Mhz
Zotac GTX 275 2GB GDDR5
Antec 850w PSU
2 x 1tb Samsung F3

Media PC:

Specifications -
Processor - AMD Phenom 9950 Quad Core Processor 2.60 GHz
RAM - 8GB Corsair XMS2-6400
Graphics Card - Gigabite GTX 460 1GB GDDR5
Hard Drive - 500GB Samsung F1
Power Supply - Corsair HX620w
Disk Drive - Sony 24x DVDRW
Card Reader
Front Temperature Display



Desk Area View:

Ikea Desk
Logitech G15 Keyboard
Logitech G9 Mouse
Razor Mousepad

i thought i had submitted more photos to this thread, apparently not



spec is in my sig, the cooling is arranged to draw air in through the back, side and front, and exhaust from the top.

ive modified the Antec 300 in a few ways too: the grills over the front fans have been removed to reduce turbulence (it makes a really annoying noise), and the motherboard tray has had a hole cut in it to allow for backplated CPU coolers to be fitted. pics below

front fans:


motherboard tray cut out: