Author |
Message |
mrr9
Has a life
Joined: Tue May 05, 2009 6:35 pm Posts: 88
|
I am planning to build two new computers - one for me and one from a friend
Mine will be a i7 (920 or 950) while my friend's one will be the AM3 (955 or 965)
we both do not do over clocking but it it worth getting better coolers than supplied with the CPUs as stock?
If so have anyone got any recommendation? - in the past I only stuck with stock coolers and when I did buy COOLER MASTER Gemin II it was too big for my case - I now brought a Antec 1200 case so size should not be a problem?
Mark
|
Sun Aug 30, 2009 12:43 am |
|
 |
Linux_User
I haven't seen my friends in so long
Joined: Tue May 05, 2009 3:29 pm Posts: 7173
|
If you're going for the 955 and you're not going to OC it I'd say the standard cooler was fine. However, the 965 runs very hot and has a TDP of 140W so I'd recommend a better cooler for that one. The 955 is also about £40-£50 cheaper and much better value IMO.
I can't comment in the Intel chips, as I've never used one in a machine I've built myself.
|
Sun Aug 30, 2009 12:46 am |
|
 |
mrr9
Has a life
Joined: Tue May 05, 2009 6:35 pm Posts: 88
|
thanks for the feedback
having read a few reviews now I think I tell my friend to stick with the 955
Mark
|
Sun Aug 30, 2009 12:54 am |
|
 |
okenobi
Spends far too much time on here
Joined: Thu Apr 23, 2009 6:59 pm Posts: 4932 Location: Sestriere, Piemonte, Italia
|
Uprated coolers will do as much for the noise level, as they will for the heat output. Always go uprated, unless you really don't care. The AMD chips in particular, run much hotter of late and will likely require more cooling than an i7.
|
Sun Aug 30, 2009 9:19 am |
|
 |
Linux_User
I haven't seen my friends in so long
Joined: Tue May 05, 2009 3:29 pm Posts: 7173
|
Well that's a load of [LIFTED] right there. The only chips from AMD that run excessively hot are the 140W models such as the 9950 and the 965. A 955 would happily run on the standard cooler, even when overclocked. As for the noise, they're not any noisier than your average case fan.
|
Sun Aug 30, 2009 9:42 am |
|
 |
saspro
Site Admin
Joined: Thu Apr 23, 2009 5:53 pm Posts: 8603 Location: location, location
|
For the i7 a Fenrir Titan is a great choice. It's silent. Even at 4GHz the titan cannot be heard in my case.
|
Mon Aug 31, 2009 7:50 am |
|
 |
okenobi
Spends far too much time on here
Joined: Thu Apr 23, 2009 6:59 pm Posts: 4932 Location: Sestriere, Piemonte, Italia
|
I never said they wouldn't run with a standard cooler. Just that they need more cooling than the Intel chips, as they run hotter. Which is true. Also the OP mentioned the 965.
|
Mon Aug 31, 2009 9:08 am |
|
 |
mrr9
Has a life
Joined: Tue May 05, 2009 6:35 pm Posts: 88
|
From: http://www.bit-tech.net/hardware/coolin ... oup-test/1Core i7 Heatsink Group Test "The problem gets even trickier now that all Intel’s Core i7 processors require a whopping 130W TDP (Thermal Design Power) of cooling to keep them working safely at load." From: http://www.nordichardware.com/news,9821.htmlAMD reduces TDP rating of Phenom II X4 965 "It's still a bit high with a TDP rating of 125W" Question: are they talking about the same thing here? From this and other reviews I now thinking of getting the: Cooler Master V8 what do you think? Mark
|
Mon Aug 31, 2009 8:48 pm |
|
|