Author |
Message |
boothy_1993
Occasionally has a life
Joined: Sun Apr 26, 2009 9:54 am Posts: 232 Location: Alfreton, Derbyshire
|
my dad said that he would buy me the rest of the components to finish of my media pc. Already have: microfly sff matx case gpu - 8800gts c2d cpu 2gb ddr2 ram
need: mobo hdd 1tb dvd-rw psu cpu cooler 120mm and 80mm fan.
cheers boothy
|
Sat Oct 31, 2009 8:19 pm |
|
 |
Spreadie
I haven't seen my friends in so long
Joined: Fri Apr 24, 2009 6:06 pm Posts: 6355 Location: IoW
|
Spinpoint F3 for 1TB HDD. Which Core2Duo is it? I've just been fiddling with my E6400 this afternoon, in a media chassis with poor cooling potential. The Vid is 1.2375v, and the mobo sets the vcore at that value, but I'm running it at stock speed on a vcore of 1.0v. A two hour Orthos stress test didn't turn up any problems, and the CPU is running 16 degs cooler.
_________________ Before you judge a man, walk a mile in his shoes; after that, who cares?! He's a mile away and you've got his shoes!
|
Sat Oct 31, 2009 10:59 pm |
|
 |
boothy_1993
Occasionally has a life
Joined: Sun Apr 26, 2009 9:54 am Posts: 232 Location: Alfreton, Derbyshire
|
its an e6300.
|
Sun Nov 01, 2009 10:03 am |
|
 |
mikepgood
Doesn't have much of a life
Joined: Thu Apr 23, 2009 6:23 pm Posts: 710
|
May be staing the obvious but needs to be as quiet as possible. You really do notice fan and disk noise. Passive graphic card and chipset, and as siolent a cpu cooler as you can find. Rubber mounts for the HDD. Not so vital for the DVD
_________________ No Apples were used in the making of this post.
|
Sun Nov 01, 2009 11:09 am |
|
 |
boothy_1993
Occasionally has a life
Joined: Sun Apr 26, 2009 9:54 am Posts: 232 Location: Alfreton, Derbyshire
|
i was going to get this anyway: http://www.scan.co.uk/Products/Sharkoon ... ponents%29im not that concerned about noise because u wont be able to hear it over music and my other pc lol. the media pc is going to be on most of the time downloading etc. its just so i can keep all my music, picture in one place rather than across 2 flash drives and a laptop and a computer.
|
Sun Nov 01, 2009 11:42 am |
|
 |
saspro
Site Admin
Joined: Thu Apr 23, 2009 5:53 pm Posts: 8603 Location: location, location
|
What's your budget for this?
|
Mon Nov 02, 2009 5:26 pm |
|
 |
boothy_1993
Occasionally has a life
Joined: Sun Apr 26, 2009 9:54 am Posts: 232 Location: Alfreton, Derbyshire
|
bout £300
|
Mon Nov 02, 2009 6:01 pm |
|
 |
saspro
Site Admin
Joined: Thu Apr 23, 2009 5:53 pm Posts: 8603 Location: location, location
|
Have you asked your unclu spunky?
|
Mon Nov 02, 2009 9:15 pm |
|
 |
boothy_1993
Occasionally has a life
Joined: Sun Apr 26, 2009 9:54 am Posts: 232 Location: Alfreton, Derbyshire
|
he has no matx mobos lol Thats where the cpu came from XD
|
Mon Nov 02, 2009 9:29 pm |
|
 |
boothy_1993
Occasionally has a life
Joined: Sun Apr 26, 2009 9:54 am Posts: 232 Location: Alfreton, Derbyshire
|
cummon people can we spec up some systems here??
|
Mon Nov 02, 2009 9:29 pm |
|
 |
saspro
Site Admin
Joined: Thu Apr 23, 2009 5:53 pm Posts: 8603 Location: location, location
|
I am currently drinking a beer I'll post in the morning when I'm not drinking
|
Mon Nov 02, 2009 9:53 pm |
|
 |
boothy_1993
Occasionally has a life
Joined: Sun Apr 26, 2009 9:54 am Posts: 232 Location: Alfreton, Derbyshire
|
ty 
|
Tue Nov 03, 2009 9:20 am |
|
 |
saspro
Site Admin
Joined: Thu Apr 23, 2009 5:53 pm Posts: 8603 Location: location, location
|
For a cooler I'd go for a Zalman flower cooler. Nice low profile & silent at low speed. A Samsung F1 or F3 1TB drive will be fine. Ideally you'll want a modular psu, 500-600w should be more than overkill. Ditch the gfx card and replace it with a passive 8400GS or similar with hdmi.
|
Tue Nov 03, 2009 9:47 am |
|
 |
boothy_1993
Occasionally has a life
Joined: Sun Apr 26, 2009 9:54 am Posts: 232 Location: Alfreton, Derbyshire
|
Last edited by boothy_1993 on Tue Nov 03, 2009 4:40 pm, edited 2 times in total.
|
Tue Nov 03, 2009 4:34 pm |
|
 |
saspro
Site Admin
Joined: Thu Apr 23, 2009 5:53 pm Posts: 8603 Location: location, location
|
Can't read anything on that image
|
Tue Nov 03, 2009 4:38 pm |
|
|